jobholds
Instrumentation & Controls Technician
الولايات المتحدة
•
تاريخ النشر: 2022-04-04
•
1 مشاهدة
تفاصيل ومتطلبات الوظيفة
<p>As an Instrumentation and Controls Technician, you will be responsible for development, implementation, and troubleshooting of control system, selection of instrumentation, and programming of Programmable Logic Controllers (PLCs), Human-Machine-Interface stations, SCADA or other control systems for water treatment equipment.<br />
<br />
<b>What you will be responsible for</b>:<br />
<br />
-Utilize design documents including Control Logic Diagrams, Shutdown Keys, Loop Diagrams, Instrument Indices, Setpoint Lists, DCS and PLC Design documents to commission and troubleshoot control systems<br />
<br />
-Develop and/or redline P&IDs, electrical drawings/schematics, control documents, and transfer lists<br />
<br />
-Interface with customers regarding I&C designs and submitted design documents.<br />
<br />
-Understand and assess client problems and determine appropriate means of solution<br />
<br />
-Perform control system factory acceptance tests with Clients and client-designated representatives.<br />
<br />
-Work cross-functionally between engineering and service teams<br />
<br />
-Setup and troubleshoot Ethernet based networks to allow connectivity for remote monitoring and/or remote support.<br />
<br />
-Other duties as assigned<br />
<br />
<b>What will you bring to the table (Skills/Experience Required):</b><br />
<br />
-Degree in Engineering or Engineering Technology or 5 years&
39; experience designing and commissioning instrumentation and control equipment in power plants, chemical process facilities, petroleum refineries or wastewater treatment plants<br />
<br />
-Or associates degree in Electronics or Controls with 3 years&
39; field experience in troubleshooting, commissioning DCS, PLC or SCADA Control Systems.<br />
<br />
-Ability to travel in support of domestic and international trips; anticipated travel up to 75% and Field emergency calls during off-hours and on weekends<br />
<br />
-Ability to support work at remote construction sites: ability to access equipment via ladders & stairs, lift 30 lbs wear and use Personal Protective Equipment<br />
<br />
-Working experience and understanding of fieldbus networks (Controlnet, Devicenet, Foundation Fieldbus)<br />
<br />
-2 yrs of water treatment systems and equipment. UF, RO, EDR, EDI, Ion Exchange, pumps, motors, FDA, filtration, and chemical feed systems experience<br />
<br />
-Ability to gain and maintain access to sites assigned.<br />
<br />
<b>Desired:</b><br />
<br />
-Self-motivated, quick to deliver and a team player<br />
<br />
-Effective problem solving skills<br />
<br />
-Demonstrated dedication to safety<br />
<br />
-An accomplished communicator, able to produce expert technical papers, publications, and design reports<br />
<br />
-Demonstrated ability to work independently and remotely with project teams<br />
<br />
-Strong oral and written communication skills<br />
<br />
-Ability to meet all customer site requirements<br />
<br />
Please Note: the greater Phoenix AZ area is the preferred locations. However, candidates from other locations will be considered<br />
<br />
<b>What will you enjoy from working with us?</b><br />
<br />
-Recognition for your hard work and achievements!<br />
<br />
-Opportunity for new challenges! We are growing!<br />
<br />
-Competitive pay and benefits including 401k!<br />
<br />
-Paid training!<br />
<br />
-Strong leadership team!<br />
<br />
-An organization that gives back<br />
<br />
-An award-winning organization that you will be proud to work for!</p>
<br />
<b>What you will be responsible for</b>:<br />
<br />
-Utilize design documents including Control Logic Diagrams, Shutdown Keys, Loop Diagrams, Instrument Indices, Setpoint Lists, DCS and PLC Design documents to commission and troubleshoot control systems<br />
<br />
-Develop and/or redline P&IDs, electrical drawings/schematics, control documents, and transfer lists<br />
<br />
-Interface with customers regarding I&C designs and submitted design documents.<br />
<br />
-Understand and assess client problems and determine appropriate means of solution<br />
<br />
-Perform control system factory acceptance tests with Clients and client-designated representatives.<br />
<br />
-Work cross-functionally between engineering and service teams<br />
<br />
-Setup and troubleshoot Ethernet based networks to allow connectivity for remote monitoring and/or remote support.<br />
<br />
-Other duties as assigned<br />
<br />
<b>What will you bring to the table (Skills/Experience Required):</b><br />
<br />
-Degree in Engineering or Engineering Technology or 5 years&
39; experience designing and commissioning instrumentation and control equipment in power plants, chemical process facilities, petroleum refineries or wastewater treatment plants<br />
<br />
-Or associates degree in Electronics or Controls with 3 years&
39; field experience in troubleshooting, commissioning DCS, PLC or SCADA Control Systems.<br />
<br />
-Ability to travel in support of domestic and international trips; anticipated travel up to 75% and Field emergency calls during off-hours and on weekends<br />
<br />
-Ability to support work at remote construction sites: ability to access equipment via ladders & stairs, lift 30 lbs wear and use Personal Protective Equipment<br />
<br />
-Working experience and understanding of fieldbus networks (Controlnet, Devicenet, Foundation Fieldbus)<br />
<br />
-2 yrs of water treatment systems and equipment. UF, RO, EDR, EDI, Ion Exchange, pumps, motors, FDA, filtration, and chemical feed systems experience<br />
<br />
-Ability to gain and maintain access to sites assigned.<br />
<br />
<b>Desired:</b><br />
<br />
-Self-motivated, quick to deliver and a team player<br />
<br />
-Effective problem solving skills<br />
<br />
-Demonstrated dedication to safety<br />
<br />
-An accomplished communicator, able to produce expert technical papers, publications, and design reports<br />
<br />
-Demonstrated ability to work independently and remotely with project teams<br />
<br />
-Strong oral and written communication skills<br />
<br />
-Ability to meet all customer site requirements<br />
<br />
Please Note: the greater Phoenix AZ area is the preferred locations. However, candidates from other locations will be considered<br />
<br />
<b>What will you enjoy from working with us?</b><br />
<br />
-Recognition for your hard work and achievements!<br />
<br />
-Opportunity for new challenges! We are growing!<br />
<br />
-Competitive pay and benefits including 401k!<br />
<br />
-Paid training!<br />
<br />
-Strong leadership team!<br />
<br />
-An organization that gives back<br />
<br />
-An award-winning organization that you will be proud to work for!</p>
وظائف مشابهة قد تهمك
Warehouse Associate
الولايات المتحدة
عرض →
Warehouse Person (Seasonal)
الولايات المتحدة
عرض →
Warehouse Person (Loader)
الولايات المتحدة
عرض →
Warehouse Person
الولايات المتحدة
عرض →
Fleet Technician 3 (Entry Level)
الولايات المتحدة
عرض →
Trimmer x6
جنوب أفريقيا
عرض →
Fleet Technician 2 (Experienced)
الولايات المتحدة
عرض →
Field Specialist I - SVS - CC_FLD-F
إيطاليا
عرض →
Field Specialist-I
الهند
عرض →
Field Specialist II
الهند
عرض →
ملخص الوظيفة
المجال / التصنيف
فنيين
الدولة
الولايات المتحدة
نوع الدوام
دوام كامل
إعلان وظيفة موثوق ومعتمد
تم التحقق من بيانات الإعلان لضمان تجربة تقديم آمنة ومباشرة للباحثين عن عمل.