jobholds
Floorhand
الولايات المتحدة
•
تاريخ النشر: 2022-01-03
•
1 مشاهدة
تفاصيل ومتطلبات الوظيفة
<p><u><strong>JOB SUMMARY</strong></u><br />
Work under the direction of the Driller as necessary to support on-going rig operations. Implement<br />
and uphold safety and environmental compliance requirements. Operate rig floor equipment and<br />
support systems under the direction of the Driller. Perform general rig floor house-keeping duties<br />
and material preservation activities under the supervision of the Driller. Assist other personnel as<br />
directed.</p>
<p><u><strong>QUALIFICATIONS</strong></u><br />
1. High School Diploma or equivalent<br />
2. Completion of Roustabout Training Course<br />
3. Six months experience on a triple derrick rig</p>
<p><u><strong>ESSENTIAL FUNCTIONS</strong></u><br />
Drilling Operations:<br />
o Must have completed orientation process and be familiar with all company safety policies and<br />
procedures as outlined in the safety handbook.<br />
o Safely and efficiently perform all duties assigned by the Driller during drilling, work over and<br />
completion operations.<br />
o Ensure the drill floor is kept clean and that all equipment is in its proper place.<br />
o Ensure all operations are proceeding in a safe manner, and responsible for correcting or notifying<br />
responsible person of any unsafe acts and/or conditions which exist.<br />
o Attend and participate in pre-tour, post tour, special operations and weekly safety meetings.<br />
o When required, work with casing, cementing, logging, and directional crews in performing<br />
specialized operations related to down hole operations.<br />
o During tripping operations work assigned duties:<br />
o Make-up / break-out tong operator.<br />
o Pipe tailer / stabber.<br />
o Back-up tong operator.<br />
o Pull and set slips.<br />
o Make up and break out tool joints.<br />
o Replace tong dies.<br />
o Check and replace snub lines and break out lines as required.<br />
o Inspect spinning wrench for proper and safe working order. Grease as required.<br />
o Ensure air lubricator has required oil.<br />
o Inspect chain.<br />
o Inspect hanging line and counterweight assembly.<br />
o Inspect snub line.<br />
o Conduct mud viscosity and mud weight checks of the drilling mud at the shale shaker as required.</p>
<p>Maintenance Operations:<br />
o Perform general duties around the rig which may include but not limited to the following:<br />
o Perform housekeeping around the rig as required, such as keeping the rig floor clean and<br />
clear of all tools after each trip.<br />
o Keep BOPs washed down.<br />
o Keep shale shaker and de-sander clean when in use.<br />
o Perform necessary maintenance on the shale shaker.<br />
o Keep drawworks and rotary lubricated.<br />
o Become familiar with blowout and shut-in procedures.<br />
o Visually inspect the drill string so as to report wash outs, excessive wear, joint or thread damage.<br />
o May be required to do rig and equipment maintenance such as chipping, scraping, painting,<br />
scrubbing, and cleaning.<br />
o Safely and efficiently perform all duties assigned during maintenance operations.<br />
o Assist in keeping the deck of the rig free of all unnecessary tools and equipment.<br />
o Relieve the Derrickman as assigned in order to gain experience for promotion.<br />
o Assist in maintaining the general appearance of the drilling rig.</p>
Work under the direction of the Driller as necessary to support on-going rig operations. Implement<br />
and uphold safety and environmental compliance requirements. Operate rig floor equipment and<br />
support systems under the direction of the Driller. Perform general rig floor house-keeping duties<br />
and material preservation activities under the supervision of the Driller. Assist other personnel as<br />
directed.</p>
<p><u><strong>QUALIFICATIONS</strong></u><br />
1. High School Diploma or equivalent<br />
2. Completion of Roustabout Training Course<br />
3. Six months experience on a triple derrick rig</p>
<p><u><strong>ESSENTIAL FUNCTIONS</strong></u><br />
Drilling Operations:<br />
o Must have completed orientation process and be familiar with all company safety policies and<br />
procedures as outlined in the safety handbook.<br />
o Safely and efficiently perform all duties assigned by the Driller during drilling, work over and<br />
completion operations.<br />
o Ensure the drill floor is kept clean and that all equipment is in its proper place.<br />
o Ensure all operations are proceeding in a safe manner, and responsible for correcting or notifying<br />
responsible person of any unsafe acts and/or conditions which exist.<br />
o Attend and participate in pre-tour, post tour, special operations and weekly safety meetings.<br />
o When required, work with casing, cementing, logging, and directional crews in performing<br />
specialized operations related to down hole operations.<br />
o During tripping operations work assigned duties:<br />
o Make-up / break-out tong operator.<br />
o Pipe tailer / stabber.<br />
o Back-up tong operator.<br />
o Pull and set slips.<br />
o Make up and break out tool joints.<br />
o Replace tong dies.<br />
o Check and replace snub lines and break out lines as required.<br />
o Inspect spinning wrench for proper and safe working order. Grease as required.<br />
o Ensure air lubricator has required oil.<br />
o Inspect chain.<br />
o Inspect hanging line and counterweight assembly.<br />
o Inspect snub line.<br />
o Conduct mud viscosity and mud weight checks of the drilling mud at the shale shaker as required.</p>
<p>Maintenance Operations:<br />
o Perform general duties around the rig which may include but not limited to the following:<br />
o Perform housekeeping around the rig as required, such as keeping the rig floor clean and<br />
clear of all tools after each trip.<br />
o Keep BOPs washed down.<br />
o Keep shale shaker and de-sander clean when in use.<br />
o Perform necessary maintenance on the shale shaker.<br />
o Keep drawworks and rotary lubricated.<br />
o Become familiar with blowout and shut-in procedures.<br />
o Visually inspect the drill string so as to report wash outs, excessive wear, joint or thread damage.<br />
o May be required to do rig and equipment maintenance such as chipping, scraping, painting,<br />
scrubbing, and cleaning.<br />
o Safely and efficiently perform all duties assigned during maintenance operations.<br />
o Assist in keeping the deck of the rig free of all unnecessary tools and equipment.<br />
o Relieve the Derrickman as assigned in order to gain experience for promotion.<br />
o Assist in maintaining the general appearance of the drilling rig.</p>
وظائف مشابهة قد تهمك
Warehouse Associate
الولايات المتحدة
عرض →
Warehouse Person (Seasonal)
الولايات المتحدة
عرض →
Warehouse Person (Loader)
الولايات المتحدة
عرض →
Warehouse Person
الولايات المتحدة
عرض →
Fleet Technician 3 (Entry Level)
الولايات المتحدة
عرض →
Trimmer x6
جنوب أفريقيا
عرض →
Fleet Technician 2 (Experienced)
الولايات المتحدة
عرض →
Field Specialist I - SVS - CC_FLD-F
إيطاليا
عرض →
Field Specialist-I
الهند
عرض →
Field Specialist II
الهند
عرض →
ملخص الوظيفة
المجال / التصنيف
فنيين
الدولة
الولايات المتحدة
نوع الدوام
دوام كامل
إعلان وظيفة موثوق ومعتمد
تم التحقق من بيانات الإعلان لضمان تجربة تقديم آمنة ومباشرة للباحثين عن عمل.